• Snapshot Use on Dimmer Outdoor Use Sound Activated Master/Slave Auto-ranging Power Supply Replaceable Fuse User Serviceable Duty Cycle User Manual 3000 N 29 Ct, Hollywood, FL 33020 U.S.A. (800) 762-1084 – (954) 929-1115 FAX (954) 929-5560 www.chauvetlighting.com. 19 ECHNICAL PECIFICATIONS CHAUVET®, 2009, All Rights Reserved Information and specifications in this User Manual are subject to change without notice. CHAUVET® assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. • Manual Conventions CHAUVET® manuals use the following conventions to differentiate certain types of information from the regular text.

Jun 30, 2018 - KEYGENS.PRO - 4PLAY All keygen crack instant download 4PLAY All crack keygen from crack and keygen archive on New cracks.

• Safety Instructions Please read these instructions carefully. It includes important information about the installation, usage and maintenance of this product. Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture.

I NTRODUCTION Features 6-channel DMX-512 LED beam effect system Individual control of red, green, blue and white LEDs within each light (4 total) Adjustable strobe speed Built-in automated programs via DMX Built-in sound activated programs via master/slave or DMX Addi t i ona l Fe at ur e s Fits onto most standard tripods including speaker stands and the 4BAR™. • Product Overview Hanging Clamp Attachment point (2) Bracket Adjustment knob Lights (4) Microphone Power Link Out adjustment knob DMX In Power In DMX Out Tripod Attachment Adjustment Knob Microphone Control panel 2 Introduction 3/30/2010 3:40 PM. S ETUP AC Power This fixture runs on 100~240 VAC, 50/60 Hz. Before powering on the unit, make sure the line voltage to which you are connecting it is within the range of accepted voltages. Always connect the fixture to a switched circuit. Never connect the fixture to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used only as a 0 to 100% switch. • Mounting Orientation The 4PLAY™ may be mounted in any safe position, provided there is adequate room for ventilation.

Rigging Be sure that the structure can support the weight of the fixture. Please see the “Technical Specifications” section of this manual for a detailed weight listing. Mount the fixture securely. This may be done with a screw, nut and bolt, or a hanging clamp. • In addition, you should note the starting address selected for future reference. The 4PLAY™ fixture uses six DMX channels.

If this is your first time using DMX, we recommend reading the “DMX Primer” section in the “Appendix”. • Operation DMX Mode This mode allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with DMX, please read the “DMX Primer” section in the “Appendix” section of this manual.

Press until is displayed. • Master/Slave Operation This mode allows for multiple 4PLAY™ slave fixtures to follow a single master fixture. Please see the following instructions for the setup. Set the master fixture to one of the 2 standalone operating modes: automatic or sound mode. Drivers magellan promark 3 manual. • Light Addressing The 4PLAY™ has 4 lights which must all be addressed.

While these lights come preaddressed from the factory, the section below demonstrates how to address them. This is important, so that they will operate properly. Please see the instructions and drawings below for further details on how to set the DIP switches on each light. • DMX Channel Values HANNEL ALUE UNCTION Light 1-4 000  010 No function 011  016 Group 1 of White 017  022 Group 2 of White 023  028 Group 3 of White 029  034 Group 1 of Red 035 . A PPENDIX DMX Primer There are 512 channels in a DMX connection.

Channels may be assigned in any manner. A fixture capable of receiving DMX will require one or a number of sequential channels. The user must assign a starting address on the fixture that indicates the first channel reserved in the controller. There are many different types of DMX controllable fixtures and they all may vary in the total number of channels required. • Data Cabling To link fixtures together you must obtain data cables.

You can purchase CHAUVET® certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference. • 3-Pin to 5-Pin Conversion Chart If you use a controller with a 5-pin DMX output connector, you will need to use a 5- pin to 3-pin adapter. The chart below details a proper cable conversion: IN TO ONVERSION HART Conductor 3-Pin Female (Output) 5-Pin Male (Input) Ground/Shield. • Install an optically coupled DMX splitter after unit #32 Keep DMX cables separated from power cables or Interference from AC wires black lights If you still have a problem after trying the above solutions, please contact CHAUVET Technical Support. Contact Us Wor l d Wi de.

Switchgear protection and power systems sunil s rao pdf free download full. Switchgear and protection by sunil s rao pdf: User’s review: 561 417-0303 url: locker phone: laurence d.